![]() Once you remove the screw, use a spudger to lift up the metal connector to ensure that there is no contact with the metal underneath. X Research source You can do this with a T5 Torx screwdriver. If you have a MacBook Pro, you will also need to unscrew the round pancake screw that secures the battery connector in place.The latch is different per model-sometimes you'll need to actually lift a metal locking arm to pull the battery out of the socket, and on other Macs, you'll need to use the spudger to slide the connector parallel to the logic board to remove the plug from the socket.Then, using the flat end of a plastic spudger to unlatch the lock on the battery connector. Since your MacBooks screen isnt working, you wont see when its ready - so just wait until you see the MacBook Pros hard drive appear on the desktop of the other Mac. Power up the MacBook Pro while holding down the T key. ![]() X Research source Some models cover the battery connector with a long black strip, which you can easily lift away from the motherboard. Connect the MacBook Pro to the other Mac using a FireWire or Thunderbolt cable. If the battery connector is covered with tape, peel back enough of the tape to reveal the battery connector without removing the tape completely.
0 Comments
Leave a Reply. |